Management of compound odontoma with 70 denticles and impacted lateral incisor over an 8-year follow-up

Odontomas are benign developmental tumors formed by the improper growth of completely differentiated epithelial and mesenchymal cells of odontogenic origin. The etiology of odontoma is unknown and it is detected during routine radiographic examination. The ideal management is early detection and surgical enucleation. The commonly associated clinical problems of odontomas are delayed exfoliation of primary teeth, delayed eruption or impaction of permanent teeth, displacement of teeth, root resorption, congenital missing, and widening of follicular space. Here, we describe a unique case of compound odontoma with a high number of denticles managed based on a definite decision support system over 8 years. An 8-year-old boy with 70 denticles in the left maxillary region underwent enucleation. On periodic follow-up, the associated impacted lateral incisor was extruded orthodontically.

Interdisciplinary Orthodontic Treatment to Reestablishment Smile Function and Aesthetics / Tratamento Ortodôntico Interdisciplinar Para o Reestabelecimento da Função e Estética do Sorriso

Extrusive tooth movements are an important resource in orthodontic treatment and allow the manipulation of teeth and periodontal tissues. They can be performed quickly or slowly, depending on the patient's need. Rapid extrusion is indicated for cases in need of prosthetic preparation or restoration, where the bone and gingival tissues are intact, such as horizontal and oblique fractures, coronary or external root resorption, iatrogenic perforations (trepanations) and the presence of subgingival caries. The aim of this study is to describe the treatment of a patient who had a coronary fracture of the right upper central incisor, with a limit located 1 mm above the level of the bone crest. Rapid orthodontic extrusion was performed, to restore biologic distances and allow the preparation for prosthesis. It started with partial differentiated bonding of a fixed orthodontic appliance to the upper arch, to allow for a 3mm orthodontic extrusion. At the end of the extrusion, periodontal surgery was performed to increase the clinical crown and endodontic treatment. After these procedures, the case was concluded with the fixed prosthesis installation. The realization of an integrated planning allowed the restoration of aesthetics, with preservation of the functional periodontal limits for the patient.(Au)

Os movimentos dentários extrusivos constituem um recurso importante no tratamento ortodôntico e permitem a manipulação dos dentes e dos tecidos periodontais. Eles podem ser realizados de forma rápida ou lenta, dependendo da necessidade do paciente. A extrusão rápida está indicada para casos com necessidade de preparo protético ou restauração, onde os tecidos ósseo e gengival encontram-se íntegros, tais como fraturas horizontais e oblíquas, reabsorções coronárias ou radiculares externas, perfurações iatrogências (trepanações) e presença de cárie subgengival. O objetivo deste trabalho é descrever o tratamento de uma paciente que apresentava fratura coronária do incisivo central superior direito, com limite localizado 1mm acima do nível da crista óssea. Realizou se extrusão ortodôntica rápida, com a finalidade de restabelecer as distâncias biológicas e permitir o preparo para prótese. Iniciou-se com colagem diferenciada parcial de aparelho ortodôntico fixo no arco superior, para permitir a extrusão ortodôntica de 3mm. Ao término da extrusão, realizou-se cirurgia periodontal para aumento da coroa clínica e tratamento endodôntico. Após esses procedimentos, o caso foi finalizado com a instalação da prótese fixa. A realização de um planejamento integrado permitiu o restabelecimento da estética, com preservação dos limites periodontais funcionais para a paciente. (Au)

El uso de un cantiléver para el tratamiento ortodóncico del incisivo impactado en posición horizontal / Use of a cantilever for orthodontic treatment of the impacted incisor in a horizontal position

Introducción: La falta de un incisivo permanente no solo genera un efecto adverso en la estética facial, también altera la función, en especial, la guía incisiva. Los incisivos superiores pueden sufrir bloqueo mecánico o cambio en su erupción por un diente supernumerario, un golpe u otro factor. El tratamiento de elección es el quirúrgico-ortodóncico. El pronóstico dependerá de la edad, situación, posición del diente, morfología, tamaño, maduración radicular y método de tracción. Conocer el uso de una aparatología ortodóncica que sea fácil de manipular y pueda ser usada desde edades tempranas servirá de valioso aporte. Objetivo: Mostrar el uso exitoso de un cantiléver para traccionar ortodóncicamente un incisivo impactado en posición horizontal. Presentación del caso: Paciente de 8 años con maloclusión clase I, pieza 2.1 retenida en posición horizontal, presencia de supernumerario y persistencia de pieza 6.1. Se opta por extracción de supernumerario, liberación de pieza 2.1 y tracción ortodóncica. Se usó un cantiléver por vestibular confeccionado en arco de acero redondo 0.020" con dos círculos en cada extremo para brindar elasticidad y anclaje. La fuerza utilizada fue de 70 g, pasado 6 meses se alcanzó el plano de oclusión. Se cementaron brackets y tubos, se continuó con la secuencia de arcos, hasta llegar al arco acero 0.021"x0.025" durante 11 meses. Se obtiene una posición final óptima que favorece la formación radicular y cierre apical. Conclusiones: El uso del cantiléver para el tratamiento ortodóncico de incisivos permanentes impactados en posición horizontal demostró ser exitoso, fácil de manipular y controlar(AU)

Introduction: The lack of a permanent incisor not only generates an adverse effect on facial aesthetics but also alters its function, especially the incisor guidance. Upper incisors can suffer mechanical blockage or change in their eruption due to a supernumerary tooth, a blow or another factor. The treatment of choice is orthodontic-surgical. The prognosis depends on the age, tooth position, morphology, size, root maturation and traction method. Knowing the use of an orthodontic appliance, which is easy to handle and can be used from an early age, will be of valuable contribution. Objective: To show the successful use of a cantilever to enable orthodontic traction of an impacted incisor in a horizontal position. Case presentation: Eight-year-old patient with class I malocclusion, specimen 2.1 retained in a horizontal position, presence of supernumerary tooth and persistence of specimen 6.1. Extraction of the supernumerary, release of specimen 2.1 and orthodontic traction is chosen. A buccal cantilever made of a 0.020" round steel arch with two circles at each end was used to provide elasticity and anchoring. The force used was 70 g. Six months after, the occlusion plane was reached. Brackets and tubes were cemented and the sequence of arches was continued until the 0.021"x0.025" steel arch was reached in 11 months. An optimal final position is obtained, favoring root formation and apical closure. Conclusions: The use of the cantilever for orthodontic treatment of impacted permanent incisors in a horizontal position proved to be successful as well as easy to manipulate and control(AU)

Método de extrusión dentaria unitaria con fines protésicos: caso clínico / Single tooth extrusion method for prosthetic purposes: a clinical case

La pérdida de estructura dentaria por debajo del margen gingival y de la cresta ósea alveolar, ya sea por caries, fracturas traumáticas, desgaste, reabsorción radicular o perforaciones iatrogénicas, dificulta el tratamiento protésico y requiere un abordaje multidisciplinario para conseguir resultados óptimos y estables a largo plazo. Se presenta el caso de una paciente adulta que acude a consulta con la pieza 2.3, que no permite una adecuada restauración protésica sin invadir el espacio biológico. Dentro del abanico de posibilidades terapéuticas se selecciona la extrusión dentaria unitaria guiada, para poder exponer un remanente dentario adecuado supragingival, y conseguir un adecuado efecto ferrule para la posterior rehabilitación protésica. La técnica presentada es eficaz, simple, cómoda, higiénica y útil en pacientes que no desean realizarse tratamiento de ortodoncia en ambas arcadas (AU)

Effects of periodontal tissue regeneration combined with orthodontics on periodontitis / 中国基层医药

Objective:To investigate the effects of periodontal tissue regeneration combined with orthodontics on periodontitis.Methods:Eighty-six patients with periodontitis who received treatment in the Yongkang First People's Hospital, China between January 2017 and December 2018 were included in this study. They were randomly assigned to receive either periodontal tissue regeneration (control group, n = 43) or periodontal tissue regeneration combined with orthodontics (observation group, n = 43). Periodontal function, clinical efficacy, complications and patient satisfaction were compared between the control and study groups. Results:Before treatment, there were no significant differences in plaque index, gingival bleeding index, probing depth, bleeding on probing and attachment loss between the control and study groups (all P > 0.05). After treatment, plaque index, gingival bleeding index, probing depth, bleeding on probing and attachment loss in the observation group were (0.85 ± 0.27) points, (0.64 ± 0.25) points, (2.25 ± 0.24) mm, (34.30 ± 0.48)% and (3.70 ± 0.55) mm, respectively, and they were (1.36 ± 0.30) points, (1.24 ± 0.53) points, (3.49 ± 0.38) mm, (57.88 ± 0.75) %, and (4.61 ± 0.92) mm, respectively. There were significant differences in these indexes between the observation and control groups ( t = 8.286, 6.714, 18.092, 173.648, 5.567, all P < 0.05). Total effective rate in the observation group was significantly higher than that in the control group [95.35% (41/43) vs. 79.07% (34/41), χ2 = 5.108, P < 0.05). Total effective rate in the observation group was significantly lower than that in the control group [2.33% (1/43) vs. 16.28% (7/43), χ2 = 4.962, P < 0.05]. Patient satisfaction in the observation group was significantly higher than that in the control group [(91.17 ± 3.52) points vs. (84.43 ± 2.50) points, t = 10.237, P < 0.05]. Conclusion:Periodontal tissue regeneration combined with orthodontics on periodontitis for treatment of periodontitis is highly safe and effective. It can promote the recovery of oral function and increase patient satisfaction.

Effect of three different attachment designs in the extrusive forces generated by thermoplastic aligners in the maxillary central incisor

ABSTRACT Introduction: Orthodontic aligners use have increased in dentistry. The resolution of complex movements such as extrusion demands the use of attachments to reach the aimed force, but just a few studies have been developed to evaluate the biomechanical performance of the aligners and their accessories. Objective: The objective of this study was to evaluate on the three axes (X, Y and Z) the forces generated by three different attachment designs for the extrusion of the maxillary central incisor using esthetic orthodontic aligners. Methods: Three prototypes of maxillary models were developed, each one with a specific attachment inserted in the central incisor. Three aligners were manufactured for each of the three attachment designs, with 0.33-mm activation in the direction of the extrusion. An analytical device was used to evaluate the forces applied to the three axes by each aligner/attachment. The data were assessed by one-way ANOVA and Tukey's test (α = 0.05). Results: All of the studied attachment designs could satisfactorily perform the extrusion movement. However, force intensities were different in the three designs (design 1 = 2.5 N; design 2 = 2.2 N, and design 3 = 1.1 N). Furthermore, two of the three attachment designs (designs 1 and 2) eventually exerted significant forces on the X (mesiodistal) and Y (buccopalatal) axes. Conclusion: The attachment design 3 presents the best distribution of forces for extrusion movement, generating almost null forces on X and Y axes, and lower intensity of force on the Z axis.

RESUMO Introdução: O uso de alinhadores ortodônticos tem aumentado na Odontologia. Porém, para a realização de movimentos complexos, como a extrusão, é necessário usar attachments para se obter as forças desejadas. Apesar disso, há poucos estudos que tenham avaliado o desempenho biomecânico dos alinhadores e de seus attachments. Objetivo: O objetivo do presente estudo foi avaliar nos três eixos (X, Y e Z) as forças geradas por três diferentes designs de attachments para extrusão de um incisivo central superior usando alinhadores ortodônticos. Métodos: Foram confeccionados três modelos superiores prototipados, cada um com um tipo de attachmentinserido no incisivo central. Três alinhadores foram fabricados para cada um dos três designs de attachment, com ativação de 0,33 mm na direção da extrusão. Foi, então, utilizado um equipamento de análise para mensurar, nos três eixos, as forças aplicadas por cada alinhador/attachment. Os dados foram submetidos à ANOVA de fator único e ao teste de Tukey (α?#8197;= 0,05). Resultados: Todos os designs de attachments utilizados foram capazes de exercer satisfatoriamente o movimento de extrusão. Entretanto, a intensidade das forças foi diferente nos três designs (attachment 1 = 2,5 N; attachment 2 = 2,2 N e attachment 3= 1,1 N). Além disso, dois dos três designs (attachments 1 e 2) exerceram forças significativas nos eixos X (mesiodistal) e Y (vestibulopalatino). Conclusões: o design do attachment 3 apresentou a melhor distribuição de forças para o movimento de extrusão, sendo o mais próximo de forças nulas nos eixos X e Y e força de baixa intensidade no eixo Z.

Cone-beam CT analysis on the treatment efficacy in the vertically impacted maxillary central incisors / 中华口腔医学杂志

Objective@#To analyze the treatment efficacy in the vertically impacted maxillary central incisors using cone-beam CT (CBCT) and explore the treatment timing and the influence of orthodontic traction on the root development and alveolar bone height in the mixed dentition.@*Methods@#Twenty-two patients with vertically impacted maxillary central incisor who were admitted to the Department of Orthodontics, Stomatological Hospital affiliated to Nanjing Medical University from December 2012 to December 2017 were selected [12 males and 10 females, (9.2±0.9) years]. Based on the dental age, patients were classified as early treatment group (teeth ranging from a third to two thirds of root formation, n=12) and late treatment group (teeth with nearly or fully complete root formation, n=10). The contralateral maxillary central incisor was used as the control. Three-dimensional reconstruction of CBCT before treatment, after treatment and one year after treatment was carried out to measure root length, tooth surface area, tooth volume, labial and lingual apical alveolar bone thickness, the loss of labial alveolar bone height and intraosseous root ratio. The clinical crown length was measured in the mouth. The difference values of the measurement variables between the impacted teeth and the control teeth were calculated and analyzed(measurement values of impacted teeth were subtracted from control values).@*Results@#The values of root length difference beween the impacted teeth and the control teeth in the early and late treatment group were (1.58±1.56) mm and (2.57±1.00) mm, respectively after the treatment and the values were significantly less than those corresponding values before treatment [(3.47±1.40) and (3.36±0.79) mm] (P<0.05). After the treatment, the values of the surface area and volume difference between the impacted teeth and the control teeth in the early treatment group [(0±34) mm2 and (-10±44) mm3] were significantly less than those corresponding values before treatment [(38±31) mm2 and (55±70) mm3] (P<0.05). The value differences of any measurement variables between the early and late treatment group were not significantly different after the treatment (P>0.05). The root length and intraosseous root ratio of the impacted teeth after the treatment in the early and late treatment group were significantly less than those of the control teeth after the treatment (P<0.05). The clinical crown length, the loss of labial alveolar bone height of the impacted teeth after the treatment were significantly larger than those of the control teeth after the treatment (P<0.05).@*Conclusions@#Orthodontic traction promoted the root growth and development of the vertically impacted maxillary central incisors. However, the root length and alveolar bone height still cannot reach the normal level after treatment. Treatment timing had no effect on root development and alveolar bone height of vertically impacted maxillary central incisors in mixed dentition.

Risk during orthodontic treatment of the impacted teeth / 中华口腔医学杂志

The treatment of the impacted teeth is often challenging. During orthodontic treatment of the impacted teeth, unexpected tooth movement may occur for a variety of reasons including inadequate anchorage, inappropriate force vectors, ankylosis of the impacted tooth, traumatic external root resorption in adjacent teeth, and/or bony fenestration. Although cone-beam CT (CBCT) can clearly identify the location of impacted teeth, clinicians should avoid other difficulties before and during the traction of impacted teeth. This article discussed the risk factors during treatment of impacted teeth and presented some reasons of unsuccessful cases.

Resolución integral de una fractura coronorradicular complicada por traumatismo dentoalveolar: informe de un caso / Integral resolution of a complicated crown-root fracture by dentoalveolar traumatism: report of a case

Objetivo: Mostrar una alternativa de tratamiento para las fracturas coronorradiculares complicadas, que restablece la función y la estética de las piezas traumatizadas. Caso clínico: Una paciente de 16 años se presentó en la guardia del Centro Odontológico OSEP tras haber sufrido un accidente vial que le produjo un traumatismo dentoalveolar. El diagnóstico fue fractura coronaria sin exposición pulpar de la pieza dentaria 12 y fractura coronorradicular complicada de la pieza 11. El tratamiento incluyó restauración con resina compuesta de la pieza 12 y endodoncia, extrusión ortodóntica, alargamiento coronario y rehabilitación con perno de fibra de cuarzo y corona de resina compuesta de la pieza 11. Conclusiones: El tratamiento de las fracturas coronorradiculares representa un desafío para el odontólogo. Los resultados del tratamiento, en este paciente, fueron excelentes, ya que lograron devolver estética y función (AU)

Aim: To show an alternative treatment for complicated crown-root fractures, which restores function and aesthetics of the traumatized teeth. Case report: This paper reports the case of a 16-yearold girl who attends the OSEP Dental Center, stating that she had suffered a traffic accident resulting in a dentoalveolar trauma. The diagnosis was a coronary fracture without pulp exposure of tooth 12, and complicated crown-root fracture of tooth 11. Treatment included composite resin restoration of tooth 12 and endodontic, orthodontic extrusion, crown lengthening and rehabilitation with quartz fiber post and composite resin crown of tooth 11. Conclusions: The treatment of crown-root fractures poses a challenge for the dentist. The results of the treatment in this patient were excellent, and aesthetics and function were restored (AU)

Effectiveness and long-term stability of maxillary protraction / 中华口腔医学杂志

Maxillary protaction is most commonly used for the treatment of growing skeletal class Ⅲ patients with a maxillary deficiency. The present article reviewed the advances in the use of maxillary protraction, including the case selection, the timing of the treatment, the effectiveness of rapid maxillary expansion, the pattern of the maxillary protraction and the long-term stability.

Effect of incisor retraction on three-dimensional morphology of upper airway and fluid dynamics in adult class Ⅰ patients with bimaxillary protrusion / 中华口腔医学杂志

Objective@#To investigate the effect of incisor retraction on three-dimensional morphology of upper airway and fluid dynamics in class Ⅰ adult patients with bimaxillary protrusion.@*Methods@#Thirty class Ⅰ patients with bimaxillary protrusion that received fixed orthodontic treatment in Department of Stomatology, The First Affiliated Hospital of Wenzhou Medical University from January 2011 to September 2014 were selected using random number table. All the patients were treated with extraction of four first premolars and retraction of anterior teeth using implant anchorage. Cone-beam CT (CBCT) scans were performed before and after incisor retraction for all patients. The CBCT data of the upper airway were constructed using Mimics 16.0, and the flow field characteristics inside the upper airway were simulated using Ansys 14.0. The changes of volume (V), mean cross-sectional area (mCSA), maximum lateral diameters/maximum anteroposterior diameters (LP/AP) of cross section, the maximum pressure of airflow (Pmax), the minimum pressure of airflow (Pmin) and pressure drop (△P) of nasopharynx, oropharynx and hypopharynx before and after incisor retraction were measured and compared using paired t test. The correlation between the variation of △P in the most significant pharyngeal part and the morphological variables after incisor retraction was analyzed using Pearson correlation test.@*Results@#No statistical differences were observed in the morphology and flow field in nasopharynx before and after incisor retraction (P>0.05). Before incisor retraction, the oropharyngeal volume and mCSA were (7 580±622) mm3 and (217±40) mm2, respectively, and the hypopharyngeal volume and mCSA were (2 564±162) mm3, and (239±43) mm2, respectively. After incisor retraction, the volumes of oropharynx and hypopharynx were (6 885±601) mm3 and (2 535±156) mm3, respectively, and mCSA of oropharynx and hypopharynx were (197±37) mm2 and (236±42) mm2, respectively. The volume and mCSA of oropharynx and hypopharynx were significantly decreased after incisor retraction (P<0.05). The greatest changes in pharyngeal volume and mCSA occurred in the oropharynx. In addition, the LP/AP of oropharynx after incisor retraction was changed from 1.9±0.6 to 2.1±0.7, which was significantly increased compared with the levels before incisor retraction (P<0.05). After simulation of pharyngeal airflow, the oropharyngeal Pmin, hypopharyngeal Pmax and Pmin were (-13.7±4.3), (-8.3±3.8) and (-42.8±9.5) Pa, respectively, whereas the values turned to (-16.4±6.5), (-11.9±3.6) and (-46.0±11.0) Pa, respectively after incisor retraction, which was significantly reduced (P<0.05). △P of oropharynx was significantly increased from (42.7±10.1) Pa to (45.2±13.0) Pa after incisor retraction (P<0.05) and the variation of oropharyngeal △P was negatively correlated with the variation of V and mCSA in oropharynx before and after incisor retraction (r=-0.681, P=0.001; r=-0.844, P=0.000).@*Conclusions@#The oropharynx was constricted and the pharyngeal resistance was increased after incisor retraction in adult class Ⅰ patients with bimaxillary protrusion. A comprehensive and systematic evaluation of the pharyngeal morphology and ventilatory function were very important for making a scientific and rational clinical treatment plan.

Considerations in the selection of method for clinical crown lengthening / 대한치과보철학회지

Clinical crown lengthening procedure would be an effective method for overcoming adverse clinical condition such as short abutment length. There are three kinds of methods in clinical crown lengthening, those are, surgical crown lengthening, orthodontic extrusion and surgical extrusion. Clinicians have to try their best to choose a proper method among those for favorable results. This report aims to review the considerations in each method with various cases and to suggest a decision flow for appropriate selection.

Three-dimensional printed miniplate used for maxillary protraction / 中华口腔医学杂志

The miniplate was designed and three-dimensional (3D) printed according to the positions of roots and tooth germs and then it was used as skeletal anchorage to protract the maxilla. The maxilla moved forward obviously after treatment. Custom designed and 3D printed miniplate could be used for maxillary protraction.

Construction and assessment of a three-dimensional finite element model of mandibualr second molar mesialization using customized lingual appliance and mini-implant / 中华口腔医学杂志

Objective@#To construct a three-dimensional (3D) finite element model and analyze the biomechanical characteristics during mandibular second molar mesialization using customized lingual appliances and mini-implant.@*Methods@#One adult student volunteer from The First Affiliated Hospital of Zhengzhou University with lower left first molar extraction was selected. After CT scanning, Mimics, Geomagic, ANSYS were employed to develop a 3D finite element model including customized lingual brackets, stainless steel lingual arch wire, buccal buckles, lower dentition, periodontal ligaments and alveolar bone. Four different loading methods (1. the force of 1.470 N loaded at the lingual side only; 2, 3, 4. the forces of 0.490, 0.735 and 0.980 N loaded at both buccal and lingual sides, respectively.) were included. The initial displacements of the lower second molar and stress distribution in the periodontal ligaments were analyzed.@*Results@#More uniform stress distributions in the periodontal membrane of mandibular left second molar were found when the mesial force were loaded at both buccal and lingual sides than the force loaded at lingual side only. More inclination of the second molar was observed when force loaded at both sides than at lingual side only. With the values of the force increased, the mesial inclination potential of the second molar, the initial movement of the second molar and the stress distribution in the periodontal membrane increased. Under the force of 0.735 N at both buccal and lingual sides, mesially inclined initial displacements of the mandibuar second molar were observed and the stress values of von Mises was in the suitable area.@*Conclusions@#Less second molar rotation was found when the force loaded at both buccal and lingual sides than loaded at lingual side only. However, force loaded at both sides would increase the measial inclination potential of the second molar.

Effect of slow forced eruption on the vertical levels of the interproximal bone and papilla and the width of the alveolar ridge / 대한치과교정학회지

OBJECTIVE: Forced eruption has been proposed for the reconstruction of deficient bone and soft tissue. The aim of this study was to examine the changes in the alveolar ridge width and the vertical levels of the interproximal bone and papilla following forced eruption. METHODS: Patients whose hopeless maxillary anterior teeth were expected to undergo severe bone resorption and soft tissue recession upon extraction were recruited. In addition, patients whose maxillary anterior teeth required forced eruption for restoration due to tooth fracture or dental caries were included. Before and after forced eruption, the interproximal bone height was measured by radiographic analysis, and changes in the alveolar ridge width and the interproximal papilla height were measured with an acrylic stent. RESULTS: This prospective study demonstrated that the levels of the interproximal alveolar bone and papilla were significantly increased by 1.36 mm and 1.09 mm, respectively, in the vertical direction. However, the alveolar ridge width was significantly reduced by an average of 0.67 mm in the buccolingual direction. The changes in the level of the interproximal alveolar bone and papilla were positively correlated. CONCLUSIONS: Although the levels of the interproximal bone and papilla were significantly increased, the alveolar ridge width was significantly decreased following forced eruption. There was a modest positive and significant correlation between the changes in the height of the interproximal alveolar bone and the papilla. Based on our findings, modification of vertical forced eruption should be considered when augmentation of the alveolar ridge width is required.

Extrusão ortodôntica para restabelecer a arquitetura gengival / Orthodontic extrusion for restoring the gingival architecture: a clinical case report

Este artigo procurou enfatizar a importância de se realizar uma adequada avaliação tecidual antes de iniciar reabilitações estéticas, além de sugerir possíveis condutas para restabelecer a arquitetura gengival. No caso clínico apresentado, os incisivos centrais superiores foram tracionados lentamente por aparatologia ortodôntica, visando nivelar o arco gengival e devolver a papila interdental. Após a obtenção de um quadro gengival mais harmônico, a forma dental foi restaurada com facetas cerâmicas para alcançar um bom resultado estético.

This article emphasizes the importance of adequate tissue assessment before starting aesthetic restorations, as well as to suggest possible guidelines to restore the gingival architecture. In the clinical case presented, the upper central incisors were orthodontically extruded, aiming to level the gingival arch and to retrieve the dental papillae. After obtaining a more harmonic gingival architecture, the dental form was restored with ceramic veneers to achieve good aesthetic result.

Orthodontic extrusion of subgingivally fractured tooth using a removable appliance: An alternative treatment to reestablish biological width.

Restoration of a traumatically injured tooth presents a clinical challenge for a predictable aesthetic outcome. This case report describes a multidisciplinary approach of a subgingivally fractured permanent maxillary central incisor. A removable orthodontic appliance was used for orthodontic extrusion of root, and surgical gingival recontouring was done with electrocautery to reestablish the biological width. Form and function were restored establishing biological width and esthetics was repaired with porcelain fused to metal crown.

Biologic width: Understanding and its preservation.

The relationship between the periodontal health and the restoration of teeth is intimate and inseparable. Maintenance of gingival health constitutes one of the keys for tooth and dental restoration longevity. An adequate understanding of relationship between the periodontal tissue and restorative dentistry is essential to ensure adequate form and function of dentition and Esthetics and comfort to the patients. Restoration of fractured (traumatized), severely decayed, partially erupted (delayed passive eruption), worn or poorly restorated teeth is often difficult for the dentist without surgical and orthodontic intervention. Surgical crown lengthening of these teeth is necessary to provide adequate tooth structure for restoration or Esthetics enhancement, thus adhering to basic biological principles by preventing impingement on the periodontal attachment apparatus or biological width. Many clinicians have been unable to utilize the concept of biologic width in practical manner. Hence the purpose of this article is to describe the biologic width anatomy, evaluations & correction of its violation by different methods.

Orthodontic extrusion and implant site development: two case reports / Extrusão ortodôntica pré-implante: relato de dois casos clínicos

The aim of this study was to report two cases of orthodontic extrusion performed prior to dental implant placement. The first one reports the case of a 57 year-old-female who presented internal root resorption in the left central incisor, and orthodontic extrusion of this element was indicated. The treatment lasted 24 weeks. At the end of this period, the dental implant was placed. The second clinical event refers to a patient of 66 years of age who had vertical fracture in the left central incisor. In this case, the orthodontic extrusion was conducted in 12 weeks. At the end of this period, the dental implant was placed and also the temporary crown, but without occlusal contact. Both cases reported consisted of the involvement of the left central incisor in the aesthetic area and low bone density. The cases reported demonstrated that orthodontic extrusion is a viable alternative to the aesthetic and functional reconstruction with prosthesis over dental implants...

A extrusão ortodôntica é um procedimento clínico utilizado no decorrer dos anos com a finalidade, dentre outras, de preservação e ganho de tecido ósseo para permitir a restauração estética e funcional. Assim, este trabalho teve por objetivo relatar dois casos de extrusão ortodôntica realizada previamente à colocação do implante dentário. O primeiro deles relata o caso de uma paciente de 57 anos de idade que apresentou reabsorção interna no incisivo central esquerdo sendo indicada a sua extrusão ortodôntica. O tratamento durou 24 semanas. Ao final deste período foi colocado o implante no local. O segundo caso clínico refere-se a um paciente de 66 anos de idade que apresentou fratura vertical no incisivo central esquerdo. Optou-se por realizar extrusão ortodôntica, por um período de 12 semanas. Finalizado este período, foi realizada a colocação de implante e provisório sem contato oclusal. Observou-se nestes relatos que ambos os casos apresentados consistiram no comprometimento do incisivo central esquerdo, em área estética e de pouca densidade óssea. Esses dois casos demonstraram a extrusão ortodôntica como uma alternativa viável para a reconstrução estética e funcional com prótese sobre implante...

Friction properties of orthodontic brackets coated with TiO2-xNy / 中国组织工程研究

BACKGROUND:In previous experiments, TiO2-xNy OBJECTIVE:To study the friction properties of orthodontic brackets coated with TiO-coated bracket has been confirmed to have excelent antibacterial properties and biological safety performance. 2-xNy METHODS: TiO film. 2-xNy film was prepared by radiofrequency magnetron sputtering on MBT bracket (0.022″). The TiO 2-x N y RESULTS AND CONCLUSION: TiO-coated brackets were analyzed by X-ray diffraction and scanning electron microscopy observations. The coefficient of static friction and coefficient of kinetic friction between the wires (0.012″, 0.014″, 0.016″) and orthodontic brackets were calculated. 2-xNy film on the bracket was of anatase structure, which was compact and had good crystalinity. Under dry condition, the coefficient of static friction and kinetic friction of the brackets coated with TiO2-xNy were less than those of ordinary brackets; under wet condition, the coefficients of static friction and kinetic friction of the brackets coated with TiO2-xNy were less than those of ordinary brackets, but the difference was not statisticaly significant. Nano-TiO2-xNy film can reduce the friction between bracket and archwire, which wil offer a novel opportunity to significantly reduce the friction during tooth movement.